Juniper JN0-696 valid exam dumps : Security Support, Professional (JNCSP-SEC)

The internet has no shortage of JN0-696 study material, but quality is the part nobody can vouch for. ValidDumps removes the guesswork with 36 Juniper Security Support, Professional (JNCSP-SEC) practice questions compiled through data analysis and verified by Juniper experts.

Juniper JN0-696 Exam Overview:

Certification Vendor:	Juniper Networks
Exam Name:	Juniper Security Support, Professional (JNCSP-SEC)
Exam Number:	JN0-696
Exam Price:	USD 400
Certificate Validity Period:	3 years
Available Languages:	English
Exam Format:	Multiple choice, Scenario-based questions
Real Exam Qty:	65-75
Exam Duration:	90 minutes
Related Certifications:	JNCIP-SEC JNCIS-SEC
Recommended Training:	Security (JNCIS-SEC) Training Path Juniper Networks Training Courses
Exam Registration:	Pearson VUE Juniper Exams Juniper Certification Portal
Sample Questions:
Exam Way:	Online proctored or Pearson VUE test center
Pre Condition:	Recommended to hold JNCIS-SEC certification or equivalent networking and security experience.
Official Syllabus URL:	https://www.juniper.net/us/en/training/certification.html

Juniper JN0-696 Exam Syllabus Topics:

JN0-696 Exam Essentials: Frequently Asked Questions

Juniper Security Support, Professional (JNCSP-SEC) Sample Questions:

Question 1

-- Exhibit -

-- Exhibit -Click the Exhibit button. You have created a new VPN tunnel to your partner's site but IKE Phase 1 is not coming up. You
check the trace log and find the following log message: Jun [IKED 2] iked_pm_id_validate id NOT matched. Considering the topology and the SRX Series device's configuration shown in the exhibit, which modification is needed under [edit security gateway Partner]?

A. rename address 20.1.1.1 to address 192.168.1.1
B. set remote-identity inet 192.168.1.1
C. set local-identity inet 20.1.1.1
D. set local-identity inet 50.1.1.1

Question 2

When attempting to delete IDP policies and configurations from an SRX Series device, a user enters these configuration commands:
Delete security idp
Commit
However, after the commit has completed, the configuration is still present under the [edit security idp] hierarchy.
What should the user do to permanently remove the configuration?

A. Delete the IDP templates commit script from the [edit system scripts commit] hierarchy, delete the [edit security idp] hierarchy, and then commit the change.
B. Delete the [edit security idp] hierarchy, commit the change, and immediately reboot the device.
C. Delete the /var/db/scripts/commit/templates.xsl file and reboot the device.
D. Stop the idpd process using the set system processes idp-policy disable configuration command, commit the change, delete the [edit security idp] hierarchy, and then commit that change.

Question 3

You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?

A. An IPsec tunnel between the two devices failed.
B. The fxp0 interface on the secondary device failed.
C. The control link between the devices failed.
D. A reth on the secondary device failed.

Question 4

-- Exhibit -user@SRX-1> show configuration security ike traceoptions {
file ike-trace;
flag all; } policy juniper {
proposal-set standard;
pre-shared-key ascii-text "$ $ znCO hKMXtuMX - gTz "; ## SECRET-DATA } gateway juniper {
ike-policy juniper; address 192.168.1.11; external-interface fe-0/0/7;
} user@SRX-1> show configuration security ipsec traceoptions {
flag all; } policy juniper {
proposal-set standard; } vpn juniper {
bind-interface st0.0; ike { gateway juniper; ipsec-policy juniper; }
}
user@SRX-1> show security ike security-associations
user@SRX-1> show security ipsec security-associations Total active tunnels: 0
user@SRX-1> show log ike-trace
...
Jun 13 16:21:33 ike_st_o_all_done: MESSAGE: Phase 1 { 0x3f669946 90eba0c7 - 0x76bdffab f8770040 } / 00000000, version = 1.0, xchg = Identity protect, auth_method = Pre shared keys, Responder, cipher = 3des-cbc, hash = sha1, prf = hmac-sha1, life = 0 kB / 28800 sec, key l Jun 13 16:21:33 192.168.1.10:500 (Responder) -> 192.168.1.11:500 { 3f669946 90eba0c7 76bdffab f8770040 [-1] / 0x00000000 } IP; MESSAGE: Phase 1 version = 1.0, auth_method = Pre shared keys, cipher = 3des-cbc, hash = sha1, prf = hmac-sha1, life = 0 kB / 28800 sec, key
Jun 13 16:21:33 ike_encode_packet: Start, SA = { 0x3f669946 90eba0c7 - 76bdffab f8770040 } / 00000000, nego = -1
Jun 13 16:21:33 ike_send_packet: Start, send SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1, dst = 192.168.1.11:500, routing table id = 0
Jun 13 16:21:33 ike_send_notify: Connected, SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1
Jun 13 16:21:33 iked_pm_ike_sa_done: local:192.168.1.10, remote:192.168.1.11 IKEv1
Jun 13 16:21:33 iked_pm_id_validate id NOT matched.
Jun 13 16:21:33 P1 SA 3075313 timer expiry. ref cnt 1, timer reason Defer delete timer expired (3), flags 0x331.
Jun 13 16:21:33 iked_pm_ike_sa_delete_notify_done_cB. For p1 sa index 3075313, ref cnt 1, status: Error ok
Jun 13 16:21:33 ike_expire_callback: Start, expire SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1
Jun 13 16:21:33 ike_alloc_negotiation: Start, SA = { 3f669946 90eba0c7 - 76bdffab f8770040}
...
-- Exhibit -
Click the Exhibit button.
You are troubleshooting a new IPsec VPN that is not establishing between SRX-1 and a remote end device.
Referring to the exhibit, what is causing the problem?

A. Pre-shared key mismatch
B. IKE Phase 1 IKE ID mismatch
C. IKE Phase 2 proxy ID mismatch
D. IKE Phase 1 proposals mismatch

Solutions: