[2025] QREP Exam Dumps, Test Engine Practice Test Questions
Pass QREP exam [Jul 19, 2025] Updated 62 Questions
Qlik QREP Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 17
Which components can be controlled with Qlik Enterprise Manager?
- A. Qlik Replicate on Windows.Qlik Compose
- B. Qlik Replicate.Qlik Compose. Qlik Sense
- C. Qlik Replicate. Qlik Compose. Qlik Catalog
- D. Qlik Replicate. Qlik Compose
Answer: C
Explanation:
Qlik Enterprise Manager provides a centralized command center to configure, execute, and monitor data replication and transformation tasks across the enterprise. It is specifically designed to manage and control Qlik Replicate and Qlik Compose tasks.Additionally, it integrates with Qlik Catalog to automatically catalog data assets generated by Qlik Replicate directly in Qlik Catalog1.This integration allows for tracking end-to-end data lineage, which improves compliance, governance, and trust in the data assets managed within Qlik Catalog1.
The documentation clearly states that Qlik Enterprise Manager is used to design, execute, and monitor Qlik Replicate and Qlik Compose tasks, and it also mentions the integration with QlikCatalog for data asset management2. However, there is no mention of Qlik Sense being controlled by Qlik Enterprise Manager.Qlik Sense is a separate product for data visualization and analytics, and its management is not within the scope of Qlik Enterprise Manager's functionalities as described in the available resources12.
Therefore, the correct answer isC. Qlik Replicate, Qlik Compose, Qlik Catalog, as these are the components that can be controlled with Qlik Enterprise Manager.
NEW QUESTION # 18
In Qlik Enterprise Manager Analytics, which messages can be seen in the GUI?
- A. Server settings
- B. Server and task trends
- C. Server-specific trends, specify to a task
- D. Task-specific trends, specify to a task
Answer: B
Explanation:
In the Qlik Enterprise Manager Analytics GUI, users can view messages related to both server and task trends. This includes:
Server-specific trends: These are metrics and trends related to the performance and usage of the servers, such as memory consumption and disk usage1.
Task-specific trends: These include metrics and trends specific to individual tasks, such as the number of tables and records processed, throughput, and the number of changes applied1.
Therefore, the correct answer isD. Server and task trends, as the Analytics tab in Qlik Enterprise Manager allows users to review trends over a specific time period for both servers and tasks.Users can filter the data to show information for a particular timeframe and for particular tasks, Replicate servers, source databases, and target databases2.
For more detailed information on the types of messages and trends that can be viewed in the Qlik Enterprise Manager Analytics GUI, you can refer to the official Qlik documentation onAnalytics dashboardsandAnalytics.
NEW QUESTION # 19
AQlik Replicate administrator is replicating data from a source system with some columns with large PDFs.
Which data type should be used?
- A. NVARCHAR(IOOO)
- B. DLOB
- C. NCLOB
- D. BLOB
Answer: D
Explanation:
For replicating columns that contain large PDFs, the appropriate data type to use in Qlik Replicate is:
D: BLOB: This stands for Binary Large Object and is the data type used for storing large binary data such as PDF files.The BLOB data type is suitable for handling the size and binary nature of PDF files1.
The other options are not suitable for the following reasons:
A: DLOB: This is not a recognized data type in Qlik Replicate.
B: NCLOB: NCLOB, or National Character Large Object, is used for storing large text data in the national character set and is not optimal for binary data like PDFs.
C: NVARCHAR(1000): NVARCHAR is a character data type with a specified length, which would not be suitable for large binary objects like PDFs due to size limitations and the nature of the data.
For more information on data types and their usage in Qlik Replicate, you can refer to the official Qlik Replicate documentation onReplicate data types.
NEW QUESTION # 20
AQlik Replicate administrator needs to load a Cloud Storage Data Warehouse such as Snowflake. Synapse.
Redshift. or Big Query Which type of storage Is required for the COPY statement?
- A. Relational Stores
- B. Object Storage (ADLS. S3. GCS)
- C. Flat Files
- D. Mainframes
Answer: B
Explanation:
When loading data into a Cloud Storage Data Warehouse like Snowflake, Synapse, Redshift, or Big Query, the type of storage required for the COPY statement isObject Storagesuch as Azure Data Lake Storage (ADLS), Amazon S3, or Google Cloud Storage (GCS). This is because these cloud data warehouses are designed to directly interact with object storage services, which are scalable, secure, and optimized for large amounts of data.
For example, when using Microsoft Azure Synapse Analytics as a target endpoint in Qlik Replicate, the COPY statement load method requires the Synapse identity to be granted "Storage Blob Data Contributor" permission on the storage account, which is applicable when using either Blob storage or ADLS Gen2 storage1.Similarly, for Amazon S3, the Cloud Storage connector in Qlik Application Automation supports operations with files stored in S3 buckets2.The prerequisites for using Azure Data Lake Storage (ADLS) Gen2 file system or Blob storage location also indicate the necessity of these being accessible from the Qlik Replicate machine3.
Therefore, the correct answer isD. Object Storage (ADLS, S3, GCS), as these services provide the necessary infrastructure for the COPY statement to load data efficiently into cloud-based data warehouses.
NEW QUESTION # 21
A Qlik Replicate administrator needs to configure Oracle as a source endpoint before running a task in Qlik Replicate Which are three key prerequisites? (Select three.)
- A. Configure Oracle Recovery Model
- B. Provide Oracle read-only privileges
- C. Install the Oracle Instant Client
- D. Complete a full backup of the source
- E. Enable ARCHIVELOG mode
- F. Enable supplemental logging
Answer: C,E,F
Explanation:
When configuring Oracle as a source endpoint for Qlik Replicate, there are several key prerequisites that need to be met:
Enable supplemental logging (A): Supplemental logging is crucial for capturing the changes in the Oracle database accurately, especially for Change Data Capture (CDC) operations.It ensures that all necessary column data is logged for replication purposes1.
Install the Oracle Instant Client (B): The Oracle Instant Client provides the necessary libraries for Qlik Replicate to connect to and interact with the Oracle database.It's required for the proper functioning of Qlik Replicate2.
Enable ARCHIVELOG mode (D): ARCHIVELOG mode is necessary for the Oracle database to archive redo logs, which Qlik Replicate uses to capture changes.This mode allows the database to continue functioning and preserve the logs even after a log switch, which is essential for CDC1.
The other options provided are not listed as key prerequisites for configuring Oracle as a source endpoint in Qlik Replicate:
C: Complete a full backup of the source: While it's a good practice to have a backup, it's not a prerequisite for configuring the source endpoint.
E: Provide Oracle read-only privileges: Read-only privileges might be necessary for certain operations, but they are not listed as a key prerequisite.
F: Configure Oracle Recovery Model: This is not mentioned as a prerequisite in the Qlik Replicate documentation.
Therefore, the verified answers areA,B, andD, as they represent the necessary steps to configure Oracle as a source endpoint in Qlik Replicate12.
NEW QUESTION # 22
AQlik Replicate administrator creates a new task and runs a Full Load test The administrator turns on Change Processing, and completes the settings Which method should be used to test this task?
- A. Stop the task -> Run -> Resume Processing
- B. Re-create the task.
- C. Stop the task -> Run -> Reload Target
- D. Stop the task -> Run -> Advanced Run Options -> Start Change Processing Only
Answer: D
Explanation:
After a Qlik Replicate administrator creates a new task, runs a Full Load test, and turns on Change Processing, the method to test this task would be to:
Stop the task: This ensures that no active processes are running that could interfere with the testing.
Run -> Advanced Run Options: This step allows the administrator to access more specific settings that can control how the task is executed.
Start Change Processing Only: This option will start the Change Data Capture (CDC) phase without re-running the Full Load. It's used to test the CDC mechanism specifically, ensuring that changes made at the source are captured and applied to the target correctly.
This method is supported by best practices in the Qlik community and documentation, which suggest using the Advanced Run Options to control the task's behavior for testing purposes1. It allows the administrator to verify that the Change Processing is set up correctly and is functioning as expected without the need to reload the target or recreate the task entirely. This approach is efficient and effective for testing the CDC functionality in isolation.
NEW QUESTION # 23
Which piece of information is stored and can be modified in the Provider Syntax?
- A. Endpoint definition - Servername and port number
- B. Schema definition of the endpoints
- C. Data Type Mapping
- D. Username and permission of the endpoints
Answer: C
Explanation:
The Provider Syntax in Qlik Replicate is used to define and modify certain behaviors and properties of the replication process. Specifically, it allows for the creation of a custom syntax for various operations and mappings. The information that can be stored and modified in the Provider Syntax includes:
Data Type Mapping (D): This involves creating mappings between the provider data types and Attunity Replicate data types.It allows for the customization of how data types are handled during the replication process1.
The other options provided do not align with the capabilities of the Provider Syntax:
A: Endpoint definition - Servername and port number: This information is typically configured in the endpoint settings, not within the Provider Syntax.
B: Username and permission of the endpoints: Usernames and permissions are also configured in the endpoint settings or within the security configurations of the respective systems.
C: Schema definition of the endpoints: While the schema definition is crucial for replication, it is not something that is typically modified within the Provider Syntax.
Therefore, the verified answer isD. Data Type Mapping, as it is the piece of information that is stored and can be modified within the Provider Syntax according to the Qlik Replicate documentation21.
NEW QUESTION # 24
Which is the possible Escalate Action for Table Errors?
- A. Suspend Table
- B. No Escalate Action
- C. Log Record to the Exceptions Table
- D. Stop Task
Answer: D
Explanation:
When encountering table errors in Qlik Replicate, the escalation policy is set toStop Taskand cannot be changed. This means that if the number of table errors reaches a specified threshold, the task will automatically stop, requiring manual intervention to resolve the issue.
The escalation action for table errors is specifically designed to halt the task to prevent further errors or data inconsistencies from occurring.This is a safety measure to ensure that data integrity is maintained and that any issues are addressed before replication continues1.
The other options listed are not escalation actions for table errors:
A: Log Record to the Exceptions Table: While logging errors to the exceptions table is a common action, it is not an escalation action.
B: No Escalate Action: This is not a valid option as there is a specific escalation action defined for table errors.
C: Suspend Table: Suspending a table is a different action that can be taken in response to errors, but it is not the defined escalation action for table errors in Qlik Replicate.
For more information on error handling and escalation actions in Qlik Replicate, you can refer to the official Qlik Replicate Help documentation, which provides detailed guidance on configuring error handling policies and actions for various types of errors1.
NEW QUESTION # 25
Which two endpomts have ARC (Attunity Replicate Connect) CDC (Change Data Capture) agents? (Select two )
- A. SAPHANA
- B. HP NonStop
- C. Kafka Source
- D. IBM IMS
- E. IBMDB2Z/OS
Answer: B,D
Explanation:
Questions no:17Verified answer: = A. IBM IMS & E. HP NonStopStep by Step Comprehensive and Detailed Explanation with all References: =ARC (Attunity Replicate Connect) CDC agents are used for capturing changes (CDC) and can be utilized with both relational and non-relational endpoints supported by ARC. The endpoints that have ARC CDC agents include:
IBM IMS (A): This is a database and transaction management system, and it is listed as one of the endpoints supported by ARC CDC agents1.
HP NonStop (E): This is a platform for high-availability servers and is also supported by ARC CDC agents1.
The other options provided do not align with the endpoints that have ARC CDC agents:
B: IBMDB2Z/OS: While DB2 for z/OS is a common database system, it is not mentioned in the context of ARC CDC agents.
C: Kafka Source: Kafka is a streaming platform, and while it can be an endpoint for data, it is not listed as having ARC CDC agents.
D: SAPHANA: SAP HANA is an in-memory database, and it is not specified as having ARC CDC agents.
Therefore, the verified answers areA. IBM IMSandE. HP NonStop, as they are the endpoints that utilize ARC CDC agents for capturing changes1.
NEW QUESTION # 26
Two companies are merging Both companies have IBM DB2 LUW running The Qhk Replicate administrator must merge a database (12 TB of data) into an existing database (15 TB of data). The merge will be done by IBM load.
Which approach should the administrator use?
- A. Create a new task after finishing IBM load
- B. Stop task, wait until IBM load finishes, and then resume the task
- C. Continue to run the task
- D. Stop task, finish IBM load, reload target
Answer: B
Explanation:
When merging databases, especially of such large sizes (12 TB and 15 TB), it is crucial to ensure data integrity and consistency. The recommended approach is to:
Stop the Replication Task: This is important to prevent any changes from being replicated to the target while the IBM load process is ongoing.
Perform the IBM Load: Execute the IBM load to merge the database into the existing database.
Resume the Replication Task: Once the IBM load has been successfully completed, the replication task can be resumed.
This approach ensures that the data loaded via IBM load is not missed or duplicated in the target database. It also allows Qlik Replicate to continue capturing changes from the point where the task was stopped, thus maintaining the continuity of the replication process.
It's important to note that creating a new task after the IBM load (Option D) could lead to complexities in managing the data consistency and might require additional configuration. Continuing to run the task (Option C) could result in conflicts or data integrity issues during the load process. Therefore, Option B is the safest and most reliable approach to ensure a smooth merge of the databases.
For further details and best practices, you can refer to the official Qlik Replicate documentation and support articles which provide guidance on similar scenarios1234.
NEW QUESTION # 27
Which open API methods are supported in Qlik Enterprise Manager?
- A. REST SDK. NET SDK. Python SDK
- B. HTTP APIs. REST SDK. Python SDK
- C. JavaScript. REST SDK. NET SDK
- D. gcloud. NET SDK. Python SDK
Answer: A
Explanation:
Qlik Enterprise Manager supports a range of open API methods that allow for programmatic interaction with the system. The supported API methods are:
REST SDK: This provides a RESTful interface for interacting with Qlik Enterprise Manager, allowing for operations such as viewing task details, running tasks, and exporting or importing task definitions12.
.NET SDK: The .NET SDK enables developers to use .NET languages to interact with Qlik Enterprise Manager, facilitating integration with other .NET applications3.
Python SDK: The Python SDK allows for scripting and automation of tasks in Qlik Enterprise Manager using Python, which is particularly useful for data scientists and analysts who prefer Python for data-related tasks3.
These API methods enable automation, integration with enterprise dashboards, and the ability to perform batch operations, among other tasks3.Therefore, the correct answer isC. REST SDK, .NET SDK, Python SDK, as these are the open API methods supported by Qlik Enterprise Manager3.
NEW QUESTION # 28
When running a task in Qlik Replicate (From Oracle to MS SQL), the following error message appears:
Failed adding supplemental logging for table "Table name" Which must be done to fix this error?
- A. Contact the Oracle DBA
- B. Check the permission of the source endpoint
- C. Check the permission on the target endpoint
- D. Enable supplemental logging
Answer: D
Explanation:
The error message "Failed adding supplemental logging for table" indicates that supplemental logging is not enabled on the Oracle source.
Supplemental logging must be enabled to capture the necessary changes for replication.
To fix this error, you should enable supplemental logging on the Oracle database for the specific table or tables.
This can usually be done by executing the following SQL command on the Oracle source:
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
Verify that the logging is enabled and then retry the replication task. This solution aligns with the troubleshooting steps provided in the Qlik Replicate documentation for dealing with supplemental logging errors.
The error message "Failed adding supplemental logging for table 'Table name'" indicates that supplemental logging has not been enabled for the table in the Oracle source database. Supplemental logging is necessary for Qlik Replicate to capture the changes in the Oracle database accurately, especially for Change Data Capture (CDC) operations.
To resolve this error, you should:
Enable supplemental loggingat the database level by executing the following SQL command in the Oracle database:
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA;
This command enables minimal supplemental logging, which is required for Qlik Replicate to function correctly1.
If you need to enable supplemental logging for all columns, you can use the following SQL command:
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
This ensures that all necessary column data is logged for replication purposes1.
After enabling supplemental logging, verify that it is active by querying thev$databaseview:
SELECT supplemental_log_data_min FROM v$database;
The correct return value should be 'YES', indicating that supplemental logging is enabled1.
The other options provided are not directly related to the issue of supplemental logging:
A: Contact the Oracle DBA: While contacting the DBA might be helpful, the specific action needed is to enable supplemental logging.
B: Check the permission on the target endpoint: Permissions on the target endpoint are not related to the supplemental logging requirement on the source database.
D: Check the permission of the source endpoint: Permissions on the source endpoint are important, but the error message specifically refers to the need for supplemental logging.
Therefore, the verified answer isC. Enable supplemental logging, as it directly addresses the requirement to fix the error related to supplemental logging in Qlik Replicate21.
NEW QUESTION # 29
How should missing metadata be added in a Qlik Replicate task after the task has been stopped?
- A. Drop tables or delete tables and data on target side, then run task from a certain timestamp
- B. Under Advanced Run option choose metadata only, stop task again, and then resume processing
- C. Drop tables and data on the target side, run advanced option, create metadata, and then resume task
- D. Under Advanced Run option choose reload target, stop task again, and then resume processing
Answer: B
Explanation:
If a task has missing metadata, you need to first stop the task.
Navigate to the "Advanced Run" options.
Select the option "Metadata Only."
Start the task with this setting to process the missing metadata.
Stop the task again after the metadata is added.
Resume normal task processing. This procedure ensures that only the metadata is processed without affecting the existing data on the target side. This method is recommended in Qlik Replicate documentation for handling missing metadata issues.
To add missing metadata in a Qlik Replicate task after the task has been stopped, the correct approach is to use the Advanced Run option for metadata only. Here's the process:
Select the task that requires metadata to be added.
Go to theAdvanced Runoptions for the task.
Choose theMetadata Onlyoption, which has two sub-options:
Recreate all tables and then stop: This will rebuild metadata for all available tables in the task.
Create missing tables and then stop: This will rebuild metadata only for the missing tables or the tables that were newly added to the task1.
By selecting theMetadata Onlyoption and choosing to create missing tables, you can ensure that the metadata for the newly added tables is updated without affecting the existing tables and data. After this operation, you can stop the task again and then resume processing.
The other options provided are not the recommended methods for adding missing metadata:
AandDsuggest dropping tables or data, which is not necessary for simply adding metadata.
Bsuggests reloading the target, which is not the same as updating metadata only.
Therefore, the verified answer isC, as it accurately describes the process of adding missing metadata to a Qlik Replicate task using the Advanced Run options1.
NEW QUESTION # 30
Where are the three options in Qlik Replicate used to read the log files located? (Select three.)
- A. In Data directory of Installation
- B. In External monitoring tool
- C. In Diagnostic package
- D. In Monitor of Qlik Replicate
- E. In Windows Event log
- F. In Enterprise Manager
Answer: A,C,D
Explanation:
In Qlik Replicate, the options to read the log files are located in the following places:
In Diagnostic package (B): The diagnostic package in Qlik Replicate includes various log files that can be used for troubleshooting and analysis purposes1.
In Data directory of Installation (D): The log files are written to the log directory within the data directory.This is the primary location where Qlik Replicate writes its log files, and it is not possible to change this location2.
In Monitor of Qlik Replicate (E): The Monitor feature of Qlik Replicate allows users to view and manage log files.Users can access the Log Viewer from the Server Logging Levels or File Transfer Service Logging Level sub-tabs1.
The other options provided do not align with the locations where log files can be read in Qlik Replicate:
A: In Windows Event log: This is not a location where Qlik Replicate log files are stored.
C: In External monitoring tool: While external monitoring tools can be used to read log files, they are not a direct feature of Qlik Replicate for reading log files.
F: In Enterprise Manager: The Enterprise Manager is a separate component that may manage and monitor multiple Qlik Replicate instances, but it is not where log files are directly read.
Therefore, the verified answers areB,D, andE, as they represent the locations within Qlik Replicate where log files can be accessed and read21.
NEW QUESTION # 31
Which user permission level is required to import tasks?
- A. Admin
- B. Designer
- C. Operator
- D. Viewer
Answer: A
Explanation:
Questions no:38Verified answer: = B. AdminStep by Step Comprehensive and Detailed Explanation with all References: =In Qlik Replicate, different user roles are assigned specific permissions that dictate what tasks they can perform within the system. To import tasks into Qlik Replicate, a user must have the Adminrole. Here's the breakdown of permissions for each role related to task management:
Admin: This role has the highest level of permissions, including the ability to import tasks.Users with the Admin role can perform all operations within Qlik Replicate, such as creating, designing, deleting, exporting, and importing tasks1.
Designer: Users with this role can create and design tasks but do not have permission to import tasks.
Operator: This role allows users to perform runtime operations like start, stop, or reload targets but does not include permissions to import tasks.
Viewer: Users with the Viewer role can view task history and other details but cannot perform task management operations like importing tasks.
Therefore, the correct answer isB. Admin, as only users with the Admin role are granted the permission to import tasks into Qlik Replicate1.
NEW QUESTION # 32
When utilizing LogStream staging for replication, where is the Staging folder compressed and stored?
- A. On the backup server
- B. With the source endpoint
- C. On the Qlik Replicate server
- D. With the target endpoint
Answer: C
Explanation:
When using LogStream staging for replication in Qlik Replicate, the Staging folder is compressed and stored on the Qlik Replicate server itself. Here's the process:
A Log Stream Staging task is defined to replicate changes from the source endpoint to the Log Stream Staging folder1.
This task creates a "Staging" file in the Log Stream Staging folder, which contains the changes from the source database transaction log as a compressed binary file1.
The storage path for the streamed data, which includes the Staging folder, must be specified in the Log Stream target endpoint settings, and it is explicitly stated that this path should be located on the Replicate Server machine2.
Therefore, the correct answer isD. On the Qlik Replicate server, as the staging folder is located on the machine where Qlik Replicate server is running, and it is where the compressed staging files are stored12.
NEW QUESTION # 33
How can a source be batch-loaded automatically on a daily basis?
- A. Set trigger through Task Designer
- B. Enable task on full load and apply changes
- C. Set trigger through server scheduler
- D. Set trigger through Advanced Run options
Answer: C
Explanation:
To batch-load a source automatically on a daily basis in Qlik Replicate, you would typically use a server scheduler. Here's how it can be done:
Set trigger through server scheduler (A): You can configure a scheduler on the server where Qlik Replicate is running to trigger the batch load process at a specified time each day.This could be done using the operating system's built-in task scheduler, such as Windows Task Scheduler or cron jobs on Linux systems1.
The scheduler would execute a command or script that starts the Qlik Replicate task configured for batch loading.The command would utilize Qlik Replicate's command-line interface or API to initiate the task1.
This approach allows for precise control over the timing of the batch load and can be adjusted to meet the specific scheduling requirements of the data replication process1.
The other options provided are not typically used for setting up an automatic daily batch load:
B: Set trigger through Advanced Run options: While Advanced Run options provide various ways to run tasks, they do not include a scheduling function for daily automation.
C: Set trigger through Task Designer: Task Designer is used for designing and configuring tasks, not for scheduling them.
D: Enable task on full load and apply changes: This option would start the task immediately and is not related to scheduling the task on a daily basis.
Therefore, the verified answer isA. Set trigger through server scheduler, as it is the method that allows for the automation of batch loading on a daily schedule1.
NEW QUESTION # 34
......
Qlik QREP Real 2025 Braindumps Mock Exam Dumps: https://www.validdumps.top/QREP-exam-torrent.html
Qlik QREP Actual Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=16TZxqeMt8PQhh54ZUl9R7Ba-I_mD1zis