345 Q&As in UPDATED D-VXR-DY-23 Exam Questions Certification Test Engine to PDF
Get The Important Preparation Guide With D-VXR-DY-23 Dumps
NEW QUESTION # 101
Due to limitations in data center power at the primary site, an asymmetrical VxRail Stretched Cluster has been deployed. Site 1 contains 12 hosts, Site 2 contains 16 hosts, and the Witness Host is in the third site. The administrator has configured affinity rules to run the heavier workloads in Site 2.
What vSAN storage policy settings should be used to ensure adequate workload distribution and data redundancy between sites?
- A. None - stretched cluster
No Data Redundancy - B. Dual site mirroring (stretched cluster)
2 failures - RAID-1 (Mirroring) - C. None - keep data on Non-Preferred (stretched cluster)
No Data Redundancy - D. None - keep data on Non-Preferred (stretched cluster)
1 failure - RAID-1 (Mirroring)
Answer: D
NEW QUESTION # 102
To investigate a problem on a VxRail system, the onsite engineer has to collect the complete set of logs.
Which method will collect all logs at once?
- A. Click "Generate New Log Bundle" in the VxRail Manager GUI
- B. Run /mystic/generateFullLogBundle command in VxRail Manager CLI
- C. Download https://:443/appliance /support-bundle
- D. Export vCenter system logs
Answer: D
NEW QUESTION # 103
What is the remote management option for G Series VxRail nodes?
- A. iDRAC
- B. IPMI/BMC
- C. RMM
- D. iLO
Answer: B
NEW QUESTION # 104
How does an implementer get a local VxRail Configuration XML file so they can generate an As-Built Configuration Report?
- A. SSH to the VxRail Manager VM with the mystic user
SU to root
Go to the /opt/VxRail/config directory
SCP the initial-config.json file to a local location - B. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data Sent Use the Download option
- C. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directory GET the config-initial.json file
- D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > System Use the Product Documentation option
Answer: B
NEW QUESTION # 105
What is the correct order of steps to install a Dell PowerEdge-based VxRail cluster?
Answer:
Explanation:
NEW QUESTION # 106
What is the minimum configuration for a vSAN Stretched Cluster?
- A. 1+1 nodes and no witness
- B. 3+3 nodes and a witness
- C. 1+1 nodes and a witness
- D. 3+3 nodes and no witness
Answer: C
NEW QUESTION # 107
What VxRail model is designed to support graphic intensive VDI workloads?
- A. E Series
- B. P Series
- C. V Series
- D. S Series
Answer: C
NEW QUESTION # 108
How should an administrator manually validate the DNS readiness of a customer network?
- A. Generate a Network PEQ
- B. Run nslookup on server FQDN and IP
- C. Run a traceroute to the DNS server
- D. Ping the default gateway of the management VLAN
Answer: B
NEW QUESTION # 109
An implementation engineer is configuring the network firewall to support a VxRail installation.
Where can they find the necessary firewall rules?
- A. VxRail Configuration Portal
- B. Rack worksheet of the Network PEQ
- C. As-Built Configuration Report
- D. Network Validation Tool
Answer: C
NEW QUESTION # 110
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 111
A VxRail Stretched Cluster will be configured with four All-Flash nodes at each site based on the following requirements:
PFTT = 1
SFTT = 1
FTM = Erasure Coding
Based on the required usable capacity, what should be the planned capacity of the design?
- A. Single Site Capacity = 100% Total Cluster Capacity = 200%
- B. Single Site Capacity = 150% Total Cluster Capacity = 300%
- C. Single Site Capacity = 200% Total Cluster Capacity = 400%
- D. Single Site Capacity = 133% Total Cluster Capacity = 266%
Answer: D
NEW QUESTION # 112
An implementation engineer is deploying a new VxRail cluster.
What should they confirm before installing the hardware?
- A. Power distribution supports only the power rating of a single node
- B. Service laptop is on the same IP network as the iDRACs
- C. Redundant power zones exist with adequate power cables
- D. At least 24 in (61 cm) of clearance must exist in front of and behind the cabinet
Answer: D
NEW QUESTION # 113
A VxRail deployment has just been completed. The vSAN backend IOPS metrics are not available for the cluster.
What is the reason for this issue?
- A. Data has not been populated
- B. vSAN Support Insight is disabled
- C. VMware CEIP is unconfigured
- D. vSAN Performance Service is disabled
Answer: D
NEW QUESTION # 114
Match each VxRail API Method to its respective VxRail Manager function.
- A. DELETE - Remove a resource
POST - Retrieve a resource
PUT - Edit or update an existing resource
GET - Create a resource - B. DELETE - Edit or update an existing resource
POST - Retrieve a resource
PUT - Remove a resource
GET - Create a resource - C. DELETE - Remove a resource
POST - Create a resource
PUT - Edit or update an existing resource
GET - Retrieve a resource - D. DELETE - Create a resource
POST - Remove a resource
PUT - Edit or update an existing resource
GET - Retrieve a resource
Answer: C
NEW QUESTION # 115
Which model of VxRail node supports the lowest number of disk groups?
- A. E Series
- B. P Series
- C. G Series
- D. S Series
Answer: C
NEW QUESTION # 116
Which setting can be changed post-deployment without risking VxRail system failure?
- A. HA reserve capacity (for a 4 node cluster) may be reduced to 15%
- B. Enhanced vMotion Compatibility (EVC) may be disabled
- C. VMware HCIA Distributed Switch Traffic Filtering and Marking may be enabled
- D. Distributed Resource Scheduler (DRS) automation level
Answer: D
NEW QUESTION # 117
A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?
- A. vCenter Server Platform Services Controller, and VxRail Manager
- B. vCenter Server, ESXi hosts, and VxRail Manager
- C. vCenter Server Platform Services Controller, and iDRAC
- D. ESXi Hosts, VxRail Manager and iDRAC
Answer: B
NEW QUESTION # 118
What output logs are collected using the vc-support.sh script?
- A. vCenter log bundle
- B. vRealize Log Insight support bundle
- C. VxRail Manager log bundle
- D. ESXi log bundle
Answer: D
NEW QUESTION # 119
A VxRail cluster has just been deployed. The administrator notices that Deduplication and Compression are not enabled.
What is the reason for this issue?
- A. Nodes are configured with hybrid drives
- B. The VSAN licensing is missing
- C. The service is disabled by default
- D. Nodes are configured with a single disk group
Answer: C
NEW QUESTION # 120
Which software component is an optional add-on for VxRail?
- A. VMware vSAN
- B. VMware vRealize Log Insight
- C. VMware vRealize Operations
- D. Dell EMC Secure Remote Support
Answer: C
NEW QUESTION # 121
Which command is used to restart the Loudmouth process on an ESXi node?
- A. systemcti restart vmware-loudmouth
- B. /etc/int.d/loudmouth restart
- C. systemcti restart loudmouth
- D. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
Answer: B
NEW QUESTION # 122
Which step must occur prior to deploying a 2 node VxRail Cluster?
- A. Cluster object created in vCenter
- B. All ports connected to ToR switch
- C. Witness deployed and running
- D. Witness Traffic Separation configured
Answer: C
NEW QUESTION # 123
An implementation engineer is working with a customer to prepare an external vCenter Server for a new VxRail deployment with customer-supplied VDS.
What vCenter objects must exist for a successful VxRail deployment?
- A. Datacenter, Cluster, and Custom VDS
- B. Datacenter, Cluster, and VxRail Management user
- C. Datacenter and VxRail Management user only
- D. Datacenter, VxRail Management user, and Custom VDS
Answer: D
NEW QUESTION # 124
What is the correct command to restart the Loudmouth process on a VxRail node?
- A. /sbin/service loudmouth restart
- B. /usr/lib/vmware-loudmouth/bin/loudmouthc restart
- C. systemctl restart vmware-loudmouth
- D. /etc/init.d/loudmouth restart
Answer: D
NEW QUESTION # 125
......
Prepare With Top Rated High-quality D-VXR-DY-23 Dumps For Success in Exam: https://www.validdumps.top/D-VXR-DY-23-exam-torrent.html
Get Totally Free Updates on D-VXR-DY-23 Dumps PDF Questions: https://drive.google.com/open?id=1AbOLYbThDYL0aWkgvXxNBrH5t1B1W9i2