JN0-1362 Questions Pass on Your First Attempt Dumps for JNCDS-SP Certified
JN0-1362 Practice Test Pdf Exam Material
Juniper JN0-1362 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 24
You work for a service provider that offers Layer 2 services. One of the customers is purchasing Layer 2 VPN services to interconnect several sites.
In this scenario, which two functions are provided by the PE router? (Choose two )
- A. It maintains all customer Layer 3 routing information.
- B. It maintains MPLS LSPs between the sites.
- C. It maintains an MP-BGP session with each customer site to exchange customer routing information
- D. It selects the appropriate Layer 2 VPN in the service provider network.
Answer: A,C
NEW QUESTION 25
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)
- A. MPLS labels enable several logically separated networks to share a common network infrastructure.
- B. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
- C. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.
- D. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
Answer: A,D
NEW QUESTION 26
You are designing an MPLS-based network overlay for your environment that use either LDP or RSVP-signated LSPs.
Which two statements are true about these two signaling technologies (Choose two.) Which two statements are true about these two signaling technologies? (Choose two.)
- A. LDP leverages the IGP to find the best path across the network.
- B. RSVP enables an administrator to configure different traffic types to take different paths across the MPLS network.
- C. LDP uses EROs to influence the path of an LSP and enable traffic engineering.
- D. RSVP requires the traffic engineering database (TED) to find the best path across the network.
Answer: A,B
NEW QUESTION 27
You are asked to create a point-to-multipoint DCI that does not overwhelm the data plane with MAC learning traffic.
Which protocol would you use in this situation?
- A. pseudowire
- B. PPTP
- C. VPLS
- D. EVPN
Answer: C
NEW QUESTION 28
You are asked to provide a proposal for a service provider's OSPF network. The customer is concerned about the volume of link-state advertisements within their network and want to limit this traffic.
Given this scenario which design component would satisfy the customer's requirement?
- A. Use multiple areas.
- B. Use the same router IDs.
- C. Use the same AS number.
- D. Use multiple levels.
Answer: A
NEW QUESTION 29
Exhibit.
Within ISP E, R1 is load-balancing traffic destined to ISP D over the R1-R2-R5 and R1-R4-R5 paths. At some point, a link degradation event occurs in the network as shown in the exhibit. You want R1 to rapidly learn of the path failure.
- A. Enable Bidirectional Forwarding Detection between R4 and R5.
- B. Adjust the OSPF hello timer to a subsecond value between R4 and R5.
- C. Enable Bidirectional Forwarding Detection between R1 and R4.
- D. Adjust the OSPF hello timer to a subsecond value between R1 and R4.
Answer: A
NEW QUESTION 30
In your class-of-services design, you are using a multified classifier on your WAN edge devices to ensure that traffic is properly classified entering your network. You are asked to ensure that all packets traversing your core will be handled in the same manner without using firewall filters.
Given this scenario, which statement is correct?
- A. You should use rewrite rules to properly mark all DiffServ values because traffic is entering your core devices from your edge
- B. You should use a behavior aggregate (BA) classifier on all core devices to ensure incoming traffic is handled the same.
- C. You should use forwarding classes to property mark all DiffServ values because traffic is entering your core devices.
- D. You should use a scheduler on all core devices to property classify incoming traffic to ensure it is handled the same.
Answer: B
NEW QUESTION 31
MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?
- A. external BGP
- B. access control lists
- C. VPN routing and forwarding tables
- D. port access control lists
Answer: C
NEW QUESTION 32
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Juniper Secure Analytics
- B. Junos Space
- C. Junoscope
- D. Junosphere
Answer: B
NEW QUESTION 33
You are responding to an ERFP for a customer's MX-based BNG deployment that must accommodate at least 8000 subscribers. However, the customer's aggregation device only support 4094 VLANs.
Which action would you propose to solve the customer's capacity concern?
- A. Use stacked VLANs
- B. Use VLAN translation
- C. Add an additional fabric module.
- D. Add an additional line card.
Answer: D
NEW QUESTION 34
According to Juniper Networks, which two statements describe OoB network design best practices? (Choose two.)
- A. Ensure that the management network is accessible through the production network.
- B. Ensure that the management network uses a unique IP network.
- C. Ensure that only console ports are used to manage devices.
- D. Ensure that all users are authenticated using individual accounts and credentials.
Answer: B,C
NEW QUESTION 35
Which statement is correct regarding classifiers in CoS?
- A. Classifiers are used to route traffic between routing instances.
- B. Classifiers are used to change DiffServ values on outgoing packets.
- C. Classifiers are used to define the transmit rate for forwarding classes.
- D. Classifiers are used to separate traffic into different forwarding classes.
Answer: D
NEW QUESTION 36
Exhibit.
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- B. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
- C. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
- D. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
Answer: C,D
NEW QUESTION 37
You are designing a solution for a company with a central office with several branch locations geographically dispersed. You are given the following requirements:
- provides a different bandwidth at each location,
- has any-to-any connectivity,
- offloads some network responsibility.
- is inherently isolated.
- has a simple network design.
Which statement satisfies these requirements?
- A. Implement services on a mesh of dark fiber between each location
- B. Implement WAN over the public Internet.
- C. Implement Layer 2 VPN point-to-point circuits from each location to the central office.
- D. Implement Layer 3 VPN services at each location
Answer: C
NEW QUESTION 38
You are asked to provide a design proposal for a service provider's core network. The network consists of both IPv4 and IPv6 addresses and must scale up to 50 core routing devices.
In this scenario, which statement is correct regarding the IGP design?
- A. You can use OSPFv2 for IPv4 and OSPFv3 for IPv6 at the same time.
- B. You must use IS-4S to support both address families.
- C. You must use OSPFv3 to support both address families.
- D. You can use OSPFv2 to support both address families.
Answer: B
NEW QUESTION 39
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. MP-BGP
- B. MPLS
- C. VXLAN
- D. EVPN
Answer: C
NEW QUESTION 40
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?
- A. Apply a behavior aggregate classifier to the egress interface.
- B. Apply a multifield classifier to the ingress interfaces.
- C. Apply a custom scheduler map to the ingress interface.
- D. Apply a custom rewrite rule to the ingress interface.
Answer: B
Explanation:
We would need MF to match the address and set the forwarding class.
NEW QUESTION 41
......
JN0-1362 [Dec-2021] Newly Released] Exam Questions For You To Pass: https://www.validdumps.top/JN0-1362-exam-torrent.html