[Oct-2024] NSE6_FSW-7.2 Dumps PDF - NSE6_FSW-7.2 Real Exam Questions Answers
NSE6_FSW-7.2 Dumps 100% Pass Guarantee With Latest Demo
Fortinet NSE6_FSW-7.2 exam is designed for professionals who are responsible for managing network security and have a strong understanding of the fundamentals of networking. NSE6_FSW-7.2 exam covers a range of topics, including VLANs, spanning tree, link aggregation, and network security protocols. Candidates who pass the exam will have a deep understanding of FortiSwitch 7.2 and will be able to manage and secure network infrastructure effectively.
NEW QUESTION # 26
How is traffic routed on FortiSwitch?
- A. Layer 3 routing can be configured on FortiSwitch, while managed by FortiGate.
- B. ASIC hardware routing can only handle dynamic routing, if supported.
- C. FortiSwitch looks up the hardware routing table and then the forwarding information base (FIB).
- D. Hardware-based routing on FortiSwitch is handled by the CPU.
Answer: C
NEW QUESTION # 27
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?
- A. Use a migration tool based on Python script to convert the configuration.
- B. Enable the FortiLink setting on FortiSwitch before the authorization process.
- C. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.
- D. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
Answer: D
NEW QUESTION # 28
Refer to the exhibits.
You are asked to ensure that managed FortiSwitch devices are reachable by other devices, such as SNMP and other management tools across your network.
Which setting must you configure to ensure traffic from other devices in the network reaches FortiSwitch?
- A. Enable NAC settings to select the onboarding VLAN.
- B. Select a specific default gateway provided to FortiSwitch as an upstream device.
- C. Change the FortiLink interface IP address and DHCP server address range.
- D. Recreate the FortiLink interface with a nonaggregate setting.
Answer: C
NEW QUESTION # 29
What type of multimode transceiver can be used to split a 40G port?
- A. SFP transceiver
- B. SFP+ transceiver
- C. QSFP transceiver
- D. QSFP+ transceiver
Answer: D
NEW QUESTION # 30
Which two statements about the FortiLink authorization process are true? (Choose two.)
- A. FortiSwitch requires a reboot to complete the authorization process.
- B. A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.
- C. The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate serial number.
- D. FortiLink authorization sets the FortiSwitch management mode to FortiLink.
Answer: B,D
NEW QUESTION # 31
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
- A. Maximum value to accept clients DHCP request is configured as per DHCP server range.
- B. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
- C. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
- D. DHCP clients that are trusted by DHCP snooping configured is only one.
Answer: B,D
NEW QUESTION # 32
Which two statements about VLAN assignments on FortiSwitch ports are true? (Choose two.)
- A. Only assign one native VLAN on a port
- B. Assign untagged VLANs using FortiGate CLI
- C. Assign an IP address and subnet mask to FortiSwitch VLANs
- D. Configure a native VLAN on the FortiLink
Answer: A,B
NEW QUESTION # 33
Refer to the exhibit.
Which two statements best describe what is displayed in the FortiLink debug output shown in the exhibit? (Choose two.)
- A. FortiSwitch is ready to push its new hostname to FortiGate.
- B. FortiSwitch is sending FortiLink heartbeats to FortiGate.
- C. FortiSwitch is discovered and authorized by FortiGate.
- D. FortiSwitch is in a waiting state to join the stack group on FortiGate.
Answer: B,C
NEW QUESTION # 34
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
- A. FortiGate applies the quarantine-related configuration only on FortiGate.
- B. MAC address quarantine can be enabled through the FortiGate CLI only.
- C. FortiSwitch supports only by VLAN quarantine mode.
- D. FortiAnalyzer with a threat detection services license is required.
Answer: B,D
NEW QUESTION # 35
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
- A. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.
- B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces.
- C. FortiGate configures and enables egress sampling on all management interfaces.
- D. FortiGate configures and enables flow sampling on FortiSwitch but does not change existing sampling settings of interfaces.
Answer: A
NEW QUESTION # 36
Refer to the exhibits.
Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. An endpoint sent a BPDU on port1 that it received from another interface.
- B. Loop guard frame sourced from port 1 was received on port 1.
- C. port1 was shut down by loop guard protection.
- D. STP triggered a loop and applied loop guard protection on port1.
Answer: A,D
NEW QUESTION # 37
How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?
- A. Classifiers enable matching traffic based only on the VLAN ID.
- B. Only high-end FortiSwitch models support ACL.
- C. ACL can be used only at the prelookup stage in the traffic processing pipeline.
- D. FortiSwitch checks ACL policies only from top to bottom.
Answer: D
NEW QUESTION # 38
Refer to the diagnostic output:
Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?
- A. It is a MAC address of FortiLink interface on FortiGate.
- B. It is a MAC address of an upstream FortiSwitch.
- C. It is a MAC address of a switch that accepts multiple VLANs.
- D. It is a MAC address of FortiGate in HA configuration.
Answer: C
NEW QUESTION # 39
Which two statements about managing a FortiSwitch stack on FortiGate are true? (Choose two.)
- A. FortiSwitch must be operating in standalone mode before authorization.
- B. A FortiLink interface must be enabled on FortiGate.
- C. The switch controller feature must be enabled on FortiGate.
- D. Only a hardware-based FortiGate can manage a FortiSwitch stack.
Answer: B,C
NEW QUESTION # 40
Which is a requirement to enable SNMP v2c on a managed FortiSwitch?
- A. Create an SNMP user to use for authentication and encryption.
- B. Specify an SNMP host to send traps to.
- C. Enable an SNMP v3 to handle traps messages with SNMP hosts.
- D. Configure SNMP agent and communities.
Answer: D
NEW QUESTION # 41
Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?
- A. Power management
- B. Network policy
- C. Inventory management
- D. Location
Answer: C
NEW QUESTION # 42
Which feature should you enable to reduce the number or unwanted IGMP reports processed by the IGMP querier?
- A. Enable IGMP snooping proxy.
- B. Enable IGMP flood unknown multicast traffic on the global setting.
- C. Enable the IGMP flood reports setting on the mRouter port.
- D. Enable the IGMP flood setting on the static port for all multicast groups.
Answer: A
NEW QUESTION # 43
How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?
- A. Both modes move quarantined devices to the quarantine VLAN.
- B. Both modes require firewall policies to block inter-VLAN traffic.
- C. Both modes add quarantined device MAC addresses to the blocked firewall address group.
- D. Both modes block intra-VLAN traffic by FortiGate automatically.
Answer: D
NEW QUESTION # 44
Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)
- A. Settings related to DHCP option 82 are only configurable through the CLI
- B. By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.
- C. Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.
- D. switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.
Answer: A,B
NEW QUESTION # 45
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. port23 is configured as the dedicated management interface.
- B. A standalone switch with the shown serial number is connected on port23.
- C. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- D. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
Answer: B
NEW QUESTION # 46
Exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch.
Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. A standalone switch with the showm serial number is connected on por123.
- B. Port23 is configured as the dedicated management interface.
- C. Port23 is a member of a trunk that uses the Access-1 FortiSwitch senal number as the name of the trunk.
- D. Ports connect to adjacent FortiSwitch devices will show their.serial number as the na-tive VLAN
Answer: D
NEW QUESTION # 47
......
Dumps Real Fortinet NSE6_FSW-7.2 Exam Questions [Updated 2024]: https://www.validdumps.top/NSE6_FSW-7.2-exam-torrent.html
Prepare NSE6_FSW-7.2 Question Answers Free Update With 100% Exam Passing Guarantee [2024]: https://drive.google.com/open?id=1Y40EZsW3V94LgDIYs5hxqNvYK3wx7h-x