Pass HP Designing HPE Server Solutions Exam in First Attempt Guaranteed Updated Dump from ValidDumps!
Pass HPE0-S54 Exam with 110 Questions - Verified By ValidDumps
NEW QUESTION 46
A customer wants to implement a large Microsoft Storage Spaces Direct environment.
Which protocol should the customer use?
- A. RDMA
- B. VXLAN
- C. OSPF
- D. NVGRE
Answer: D
NEW QUESTION 47
A customer received their three frame Synergy system. However, they are missing a link cable that connects the frame link module between the frames.
Which type of cable do they need?
- A. MPO
- B. DAC
- C. AOC
- D. CAT6A
Answer: B
NEW QUESTION 48
A customer uses VLANs in their network. They recently acquired another company and need to extend the number of VLANs to 7400 to accommodate the growth.
What should you advise?
- A. Implement an IPv6 only environment
- B. Upgrade the NICs to models that support RoCE
- C. Transition to a VXLAN or NVGRE network configuration
- D. Edit the /etc/network/config file, and set VLAN_LIMIT=7401
Answer: C
NEW QUESTION 49
Match the HPE management tool to the customer situation. (Each customer situation may be used more than once or not at all.)
Answer:
Explanation:
Explanation
Built in tools managing single systems - not used
Cloud-based tools to manage multiple systems - Remote Support and Insight Online Customer site tools to manage multiple systems - HPE OneView and iLO Amplifier Pack
NEW QUESTION 50
A health care customer is running out of space in their small on-site data center. They need a solution for their next generation infrastructure for their hospital and clinics.
* proposed infrastructure needs the ability to run ESXi 6.5 with around 100 medium sized VMs
* customer has five remote clinics
* each clinic needs to be able to run approximately 10 VM's locally
* all of the VM's in the clinics need to be fully backed up every night What is the most appropriate solution to lead with?
- A. HPE Synergy populated with SY480 Gen10 Compute
- B. HPE SimpliVity 380 Gen10
- C. HPE Apollo AR4200
- D. HPE DL380 Gen10
Answer: B
NEW QUESTION 51
Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?
- A. The management network should be connected to the top and bottom frames
- B. Composer 2 is in the wrong frame
- C. The management ring should be connected using the FLM link ports
- D. Another composer is needed Frame 3
Answer: D
NEW QUESTION 52
A customer plans to use RESTful API to deploy their rack of DL380 Gen10 system. How does use of this protocol support the customer? (Select two.)
- A. Boot via SFTP
- B. Secure remote scripting
- C. support multiple scripting languages
- D. Boot via HTTP
- E. Ability to run scripts against multiple servers
Answer: B,C
NEW QUESTION 53
A customer needs to boot from PXE with IPv6 across the Gen10 servers. Which option must be enabled to use this feature?
- A. HPE Intelligent Provisioning with IPv6 DHCP
- B. UEFI Boot with IPv6 enabled
- C. UEFI Secure Boot
- D. Legacy One-Time boot menu
Answer: B
Explanation:
Explanation/Reference: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na- a00028429en_us&docLocale=en_US
NEW QUESTION 54
A retail customer's real-time analytics application requires the fastest possible data access and over
768GB of database capacity. Their current HPE ProLiant DL380 Gen9 servers are not meeting the performance requirements.
What should you recommend? (Choose two.)
- A. HPE ProLiant DL380 Gen10 servers
- B. HPE Scalable Persistent Memory
- C. iLO5 Advanced licenses
- D. PCle Workload Accelerator
Answer: A,D
NEW QUESTION 55
A customer has c7000 enclosures with Virtual Connect 20/40 F8 interconnect modules providing Ethernet and Fibre Channel connectivity. They are starting a proof of concept (PoC) to evaluate using a Synergy with the HPE Virtual Connect SE 40Gb F8 interconnect module as the next generation infrastructure.
Which additional component is required to enable the proof of concept solution to match the connectivity functionality of the current solution?
- A. Image Streamer
- B. iLO Advanced Premium Security
- C. a Fibre Channel license
- D. OneView Advanced
Answer: C
NEW QUESTION 56
Match the SSD drive type to the intended workload.
Answer:
Explanation:
NEW QUESTION 57
A customer uses VLANs for tenant network separation. However, they are not satisfied with the scalability limits of the setup.
Which networking technology will help the service provider to overcome these performance limits?
- A. remote direct memory access (RDMA)
- B. data center bridging (DCB)
- C. RDMA over Converged Ethernet (RoCE)
- D. network virtualization generic routing encapsulation (NVGRE)
Answer: D
NEW QUESTION 58
What is a new feature in gen10 ProLiant servers?
- A. RESTful API interface
- B. Scalable Persistent Memory
- C. Smart Memory technology
- D. Active health System log
Answer: B
NEW QUESTION 59
Which iLO 5 feature allows a customer to directly, physically connect to a ProLiant server to troubleshoot issues?
- A. iLO Amplifier Pack
- B. iLO Federation
- C. iLO mobile app
- D. iLO Service Port
Answer: D
NEW QUESTION 60
A customer needs a server that:
* supports their in-memory database
* is oriented towards business critical workloads
Which questions should you ask before you make a recommendation? (Choose two.)
- A. How much memory will the application require?
- B. How will the operating systems and application be deployed?
- C. How many cores are required to optimize the application
- D. How important is it for the server to support ASHRAE A3/A4 standards?
- E. How will the datacenter provide backup power in the event of failure
Answer: A,C
NEW QUESTION 61
A customer completed a successful Synergy PoC consisting of a single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules. The customer needs additional frames to allow for growth. They require 20GB to each compute module.
How may additional frames can be added to the existing logical enclosure?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 62
What is a requirement for the frames in an HPE Synergy Image Streamer?
- A. a single Composer in each Synergy frame
- B. redundant Master modules in each frame
- C. a minimum of three Synergy frames
- D. fully populated Synergy compute modules in each frame
Answer: C
NEW QUESTION 63
A customer needs to deploy an operating system for a ProLiant DL Gen10 server.
Which HPE tool can be used to complete this task?
- A. Insight Control server provisioning
- B. OneView
- C. Intelligent Provisioning
- D. iLO Federation
Answer: A
NEW QUESTION 64
During a presentation on Synergy fabric technology, a customer states that they would not purchase Virtual Connect modules because they would be paying for Fibre Channel technology that they have no intention of using.
How should you handle this objection?
- A. Explain to the customer that the only Fibre Channel support is through FCoE and does not add to the module cost.
- B. Inform the customer that native Fibre Channel support is an optional, licensed feature.
- C. Explain to the customer that HPE does not pass on the cost of including Fibre Channel support to the customer.
- D. Inform the customer that native Fibre Channel support is provided through an optional daughterboard.
Answer: D
NEW QUESTION 65
A customer is considering deploying a significant number of HPE BladeSystem Gen10 servers with an HPE 3Par storage solution for a new cloud solution. You propose HPE OneView as the management platform.
Which HPE OneView feature should you emphasize during conversations with the customer?
- A. volume presentation from the 3Par and automated zoning
- B. servers and storage firmware upgrades
- C. operating system deployment through Image Streamer
- D. patch deployment for operating system and storage components
Answer: A
NEW QUESTION 66
A health care customer is running out of space in their small on-site data center. They need a solution for their next generation infrastructure for their hospital and clinics.
proposed infrastructure needs the ability to run ESXi 6.5 with around 100 medium sized VMs
customer has five remote clinics
each clinic needs to be able to run approximately 10 VM's locally
all of the VM's in the clinics need to be fully backed up every night
What is the most appropriate solution to lead with?
- A. HPE Synergy populated with SY480 Gen10 Compute
- B. HPE SimpliVity 380 Gen10
- C. HPE Apollo AR4200
- D. HPE DL380 Gen10
Answer: B
NEW QUESTION 67
Which product automatically generates reports on collected lifecycle management events?
- A. HPE OneView
- B. Insight Online
- C. HPE ONEView Global Dashboard
- D. Insight Control
Answer: B
NEW QUESTION 68
A customer is installing multiple racks of DL380 Gen10 servers in a datacenter. They need to configure each one with identical BIOS settings.
Which tools are available to solve the situation? (Choose two.)
- A. HPE OneView
- B. HPE ICsp
- C. HPE Intelligent Provisioning
- D. HPE Active Health System
- E. HPE Smart Update Manager
Answer: B,C
NEW QUESTION 69
Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?
- A. The management network should be connected to the top and bottom frames
- B. Composer 2 is in the wrong frame
- C. The management ring should be connected using the FLM link ports
- D. Another composer is needed Frame 3
Answer: D
NEW QUESTION 70
......
Penetration testers simulate HPE0-S54 exam: https://www.validdumps.top/HPE0-S54-exam-torrent.html