Use the best ways of preparing for NS0-175 Exam Dumps with ValidDumps Network Appliance NS0-175 dump PDF [2021]
Network Appliance NS0-175 exam candidates will surely pass the Exam if they consider the NS0-175 dumps learning material presented by ValidDumps.
NEW QUESTION 122
Which mode must your Fabric Interconnects be using to participate in the Spanning Tree Protocol (STP) and send Bridge Port Data Units (BPDUs)?
- A. Loopguard Mode
- B. End Host Mode
- C. Switching Mode
- D. STP Mode
Answer: D
NEW QUESTION 123
Refer to the exhibit.
Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?
- A. A and B. portchannel 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. portchannel 4I and J. po11 and vpc 11K and L. po12 and vpc 12
- B. A and B. portchannel 1C and D. vpc 2E and F. vpc 2G and H. portchannel 4I and J. vpc 11K and L. vpc 11
- C. A and B. portchannel 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. portchannel 1I and K. po11 and vpc 11J and L. po12 and vpc 12
- D. A and B. vpc 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. vpc 4I and K. po11 and vpc 11J and L. po12 and vpc 12
- E. A and B. po1 and vpc 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. po4 and vpc 4I and J. po11 and vpc 11K and L. po12 and vpc 12
Answer: C
NEW QUESTION 124
To add a user to the appliance database, you must enter the _____ and the _____.
- A. user name
- B. password
- C. access permissions
- D. group
Answer: A,C
NEW QUESTION 125
A customer must connect a VMFS datastore for a virtualized application.
Which type of connection should be configured in this scenario?
- A. Microsoft iSCSI Host Initiator
- B. iSCSI VMkernel port
- C. OpenStack Block Storage Service
- D. NFS VMkernel port
Answer: A
NEW QUESTION 126
View the Exhibit.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available.
Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. I
- B. IV
- C. II
- D. III
Answer: D
NEW QUESTION 127
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. Telnet
- B. RDP
- C. SSH
- D. SAML
Answer: A,C
NEW QUESTION 128
Which four are components of Cisco UCS stateless computing? (Choose four)
- A. A one to one mapping of an application to a server
- B. A one to one mapping to the identity information burned into the hardware (mac addresses, etc).
- C. Boot from SAN
- D. Elements of a server's personality, which may be included in a service profile, include firmware versions, UUID, MAC Addresses, World Wide Names, and boot settings.
- E. Utilization of service profiles to apply parameter settings from server hardware
- F. Every physical server in a Cisco UCS instance should remain anonymous until you associate a service profile with it
Answer: C,D,E,F
NEW QUESTION 129
A customer is designing a 4-node FlexPod configuration with VMware vSphere 6.x. The configuration consists of a FAS8200 HA pair and an AFF A300 HA pair.
Normal VM workloads will reside on the FAS nodes, and critical VM applications will reside on the AFF nodes. Storage network traffic needs to be highly available, but the critical VM application workload cannot share physical resources with the other workloads.
In this scenario, how will the broadcast domains be designed?
- A. Each broadcast domain will include the data LIFs and the cluster LIFs.
- B. The broadcast domains will be used only for intercluster LIFs between the HA pairs.
- C. The broadcast domains will include only ports from a single HA-pair.
- D. The default broadcast domain will be used for the traffic.
Answer: D
NEW QUESTION 130
Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)
- A. Deployment of a Windows or Linux Operating system
- B. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups
- C. Deploy patches for software, such as an OS or an application
- D. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.
- E. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
- F. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
- G. Management of non-Cisco x86 systems
- H. Install software applications, such as databases, application server software, or web servers
Answer: B,D,E,F
NEW QUESTION 131
Which sends support summary information to NetApp through HTTPS?
- A. TechSupport
- B. AutoSupport
- C. FlexSupport
- D. SnapSupport
Answer: B
NEW QUESTION 132
A customer is designing a FlexPod using a 4-node AFF8080EX cluster. The nodes will be cabled to NetApp recommendations.
In this scenario, which switch model would be used for the cluster interconnect network?
- A. NetApp CN1610
- B. Cisco Nexus 5596UP
- C. NetApp CN1601
- D. Cisco Nexus 3048
Answer: A
NEW QUESTION 133
An administrator plans to deploy a Nexus 1000V with VMware ESXi in a FlexPod environment. The administrator wants to ensure proper operation under multiple failure scenarios.
In this scenario, which two configuration actions conform to Cisco's best practices for high availability? (Choose two.)
- A. Ensure that the Nexus 1000V control and data traffic are on different VLANs.
- B. Configure a dynamic vNIC policy on the service profile for the ESXi host.
- C. Change the configuration of the UCS from end-host mode to switch mode.
- D. Disable fabric failover on the adapters in a UCS service profile.
Answer: B,C
NEW QUESTION 134
Which one of the following object types are not cacheable?
- A. HTTP 200 OK responses
- B. VOD MPEG4 Streams
- C. VOD MMS Streams
- D. DNS A records
Answer: B
NEW QUESTION 135
Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?
- A. Nexus 7000
- B. Nexus 5548
- C. Nexus 5596
- D. Nexus 3048
Answer: D
NEW QUESTION 136
Which two statements are true about VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode? (Choose two.)
- A. VXLAN supports the Spanning Tree Protocol for loop prevention.
- B. VXLAN is only supported on Cisco Nexus 9000 Series switches.
- C. VXLAN is a Layer 2 overlay scheme over a Layer 3 network.
- D. VXLAN segments are independent of the underlying network topology.
Answer: C,D
NEW QUESTION 137
Which high-availability feature is supported by FlexPod with Unified Computing System Mini (UCS Mini) in a single chassis?
- A. blade and rack mount servers
- B. redundant Fabric Extenders
- C. redundant 6248 Fabric Interconnects
- D. redundant 6324 Fabric Interconnects
Answer: D
NEW QUESTION 138
You have determined that a FlexPod Express solution, based on a NetApp FAS2552A using an iSCSI boot for the compute layer, is the preferred solution for your customer.
In this scenario, which two components are required in the NetApp storage system? (Choose two.)
- A. two 10-Gbps Ethernet ports
- B. FC license
- C. iSCSI license
- D. two 8-Gbps Fibre Channel ports
Answer: A,D
NEW QUESTION 139
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.validdumps.top/NS0-175-exam-torrent.html