The Best Cisco 350-401 Study Guides and Dumps of 2023
Top Cisco 350-401 Exam Audio Study Guide! Practice Questions Edition
NEW QUESTION # 381
Refer to me exhibit.
Refer to the exhibit. Which configuration change will force BR2 to reach 209 165 201 0/27 via BR1?
- A. Set the origin to igp on BR2 toward PE2 inbound.
- B. Set the MED to 1 on PE2 toward BR2 outbound.
- C. Set the local preference to 150 on PE1 toward BR1 outbound
- D. Set the weight attribute to 65.535 on BR1 toward PE1.
Answer: B
Explanation:
NEW QUESTION # 382
How does QoS traffic shaping alleviate network congestion?
- A. It fragments large packets and queues them for delivery.
- B. It drops packets randomly from lower priority queues.
- C. It buffers and queues packets above the committed rate.
- D. It drops packets when traffic exceeds a certain bitrate.
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645- policevsshape.html
NEW QUESTION # 383
Based on this interface configuration, what is the expected state of OSPF adjacency?
- A. Full on both routers
- B. 2WAY/DROTHER on both routers
- C. FULL/BDR on R1 and FULL/BDR on R2
- D. not established
Answer: D
Explanation:
Explanation
On Ethernet interfaces the OSPF hello intervl is 10 second by default so in this case there would be a Hello interval mismatch -> the OSPF adjacency would not be established.
NEW QUESTION # 384
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 385
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 386
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
On premise: customizable,specific requirements,resources
Cloud: scale, built-in automated backup, strong stable internet
NEW QUESTION # 387
Drag and drop the LIPS components on the left to the correct description on the right.
Answer:
Explanation:
* Map server
* EID
* ETR
NEW QUESTION # 388
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
- A. 192.168.101.14
- B. 192.168.101.6
- C. 192.168.101.18
- D. 192.168.101.10
Answer: C
Explanation:
The '>' shown in the output above indicates that the path with a next hop of 192.168.101.2 is the current best path.
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost > eBGP Peering > Router ID BGP prefers the path with highest weight but the weights here are all 0 (which indicate all routes that are not originated by the local router) so we need to check the Local Preference. Answer
'192.168.101.18' path without LOCAL_PREF (LocPrf column) means it has the default value of 100.
Therefore we can find the two next best paths with the next hop of 192.168.101.18 and
192.168.101.10.
We have to move to the next path selection attribute: Originate. BGP prefers the path that the local router originated (which is indicated with the "next hop 0.0.0.0"). But none of the two best paths is self-originated.
The AS Path of the next hop 192.168.101.18 is shorter than the AS Path of the next hop
192.168.101.10 then the next hop 192.168.101.18 will be chosen as the next best path.
NEW QUESTION # 389
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 390
Refer to the exhibit.
Which privilege level is assigned to VTY users?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 391
A network engineer is adding an additional 10Gps link to an exiting 2x10Gps LACP-based LAG to augment its capacity. Network standards require a bundle interface to be taken out of service if one of its member links goes down, and the new link must be added with minimal impact to the production network. Drag and drop the tasks that the engineer must perform from the left into the sequence on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 392
Refer to the exhibit.
Which two facts does the device output confirm? (Choose two.)
- A. The device is configured with the default HSRP priority
- B. The standby device is configured with the default HSRP priority.
- C. The device's HSRP group uses the virtual IP address 10.0.3.242
- D. The device sends unicast messages to its peers
- E. The device is using the default HSRP hello timer
Answer: B,E
NEW QUESTION # 393
How does the RIB differ from the FIB?
- A. The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.
- B. The FIB includes many routes a single destination. The RIB is the best route to a single destination.
- C. The RIB includes many routes to the same destination prefix. The FIB contains only the best route
- D. The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.
Answer: D
Explanation:
NEW QUESTION # 394
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 395
Which QoS component alters a packet to change the way that traffic is treated in the network?
- A. Policing
- B. Shaping
- C. Marking
- D. Classification
Answer: C
Explanation:
QoS Packet Marking refers to changing a field within a packet either at Layer 2 (802.1Q/p CoS, MPLS EXP) or Layer 3 (IP Precedence, DSCP and/or IP ECN).
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_mqc/configuration/xe-16/qos- mqc-xe-16-book/qos-mrkg.html
NEW QUESTION # 396 
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: B
NEW QUESTION # 397
Which action is performed by Link Management Protocol In a Cisco StackWise Virtual domain?
- A. it determines if the hardware Is compatible to form the StackWise Virtual domain.
- B. It determines which switch becomes active or standby.
- C. It discovers the StackWise domain and brings up SVL interfaces.
- D. It rejects any unidirectional link traffic forwarding.
Answer: B
Explanation:
Explanation
NEW QUESTION # 398
Which description of an SD-Access wireless network infrastructure deployment is true?
- A. The wireless client is part of the fabirc overlay.
- B. The WLC is part of the fabric underaly.
- C. The access point is part the fabirc overlay.
- D. The access point is part of the fabric underlay.
Answer: C
NEW QUESTION # 399
......
Valid 350-401 Exam Updates - 2023 Study Guide: https://www.validdumps.top/350-401-exam-torrent.html
350-401 Certification - The Ultimate Guide: https://drive.google.com/open?id=1Mf9xw-am-XCPJdd58VBiakImGMoaLQNM