Verified 156-315.81.20 dumps Q&As - 100% Pass from ValidDumps [Q171-Q192]

Share

Verified 156-315.81.20 dumps Q&As - 100% Pass from ValidDumps

Pass 156-315.81.20 Exam in First Attempt Guaranteed 2026 Dumps!

NEW QUESTION # 171
What is the default size of NAT table fwx_alloc?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A


NEW QUESTION # 172
SmartConsole R81 requires the following ports to be open for SmartEvent R81 management:

  • A. 19190,22
  • B. 19090,22
  • C. 18190,80
  • D. 19009,443

Answer: D


NEW QUESTION # 173
What destination versions are supported for a Multi-Version Cluster Upgrade?

  • A. R76 and later
  • B. R70 and Later
  • C. R81.20 and Later
  • D. R81.40 and later

Answer: C


NEW QUESTION # 174
Which utility allows you to configure the DHCP service on Gaia from the command line?

  • A. cpconfig
  • B. ifconfig
  • C. dhcp_ofg
  • D. sysconfig

Answer: D


NEW QUESTION # 175
Traffic from source 192.168.1.1 is going to www.google.com. The Application Control Blade on the gateway is inspecting the traffic.
Assuming acceleration is enabled which path is handling the traffic?

  • A. Fast Path
  • B. Slow Path
  • C. Medium Path
  • D. Accelerated Path

Answer: B


NEW QUESTION # 176
What SmartEvent component creates events?

  • A. SmartEvent Policy
  • B. SmartEvent GUI
  • C. Correlation Unit
  • D. Consolidation Policy

Answer: C


NEW QUESTION # 177
In Advanced Permanent Tunnel Configuration, to set the amount of time the tunnel test runs without a
response before the peer host is declared 'down', you would set the_________?

  • A. life sign timeout
  • B. life_sign_polling_interval
  • C. life_sign_timeout
  • D. life sign polling interval

Answer: C


NEW QUESTION # 178
In order to get info about assignment (FW, SND) of all CPUs in your SGW, what is the most accurate CLI command?

  • A. fw ctl sdstat
  • B. fw ctl affinity -l -a -r -v
  • C. fw ctl multik stat
  • D. cpinfo

Answer: B


NEW QUESTION # 179
Which Queue in the Priority Queue has the maximum priority?

  • A. Control
  • B. High Priority
  • C. Routing
  • D. Heavy Data Queue

Answer: C


NEW QUESTION # 180
What is the SandBlast Agent designed to do?

  • A. If malware enters an end user's system, the SandBlast Agent prevents the malware from spreading with the network
  • B. Performs OS-level sandboxing for SandBlast Cloud architecture
  • C. Ensure the Check Point SandBlast services is running on the end user's system
  • D. Clean up email sent with malicious attachments

Answer: A


NEW QUESTION # 181
Which of the following describes how Threat Extraction functions?

  • A. Detect threats and provides a detailed report of discovered threats.
  • B. Delivers PDF versions of original files with active content removed.
  • C. Delivers file with original content.
  • D. Proactively detects threats.

Answer: B


NEW QUESTION # 182
What solution is multi-queue intended to provide?

  • A. Reduce the performance of network interfaces
  • B. Improve the efficiency of CoreXL Kernel Instances
  • C. Reduce the confusion for traffic capturing in FW Monitor
  • D. Improve the efficiency of traffic handling by SecureXL SNDs

Answer: B


NEW QUESTION # 183
What needs to be configured if the NAT property 'Translate destination or client side' is not enabled in Global Properties?

  • A. Enabling 'Allow bi-directional NAT' for NAT to work correctly.
  • B. A host route to route to the destination IP.
  • C. Nothing, the Gateway takes care of all details necessary.
  • D. Use the file local.arp to add the ARP entries for NAT to work.

Answer: C


NEW QUESTION # 184
Which command can you use to verify the number of active concurrent connections?

  • A. fw ctl pstat
  • B. show connections
  • C. fw conn all
  • D. show all connections

Answer: A


NEW QUESTION # 185
What is the most ideal Synchronization Status for Security Management Server High Availability deployment?

  • A. Lagging
  • B. Collision
  • C. Never been synchronized
  • D. Synchronized

Answer: D


NEW QUESTION # 186
What API command below creates a new host object with the name "My Host" and IP address of "192 168 0 10"?

  • A. new host name "My Host" ip-address "192 168.0.10"
  • B. create host name "My Host" ip-address "192.168 0.10"
  • C. set host name "My Host" ip-address "192.168.0.10"
  • D. mgmt.cli -m <mgmt ip> add host name "My Host" ip-address "192.168.0 10"

Answer: C


NEW QUESTION # 187
What is the best method to upgrade a Security Management Server to R81.x when it is not connected to the Internet?

  • A. Advanced upgrade or CPUSE offline upgrade
  • B. SmartUpdate offline upgrade
  • C. CPUSE offline upgrade only
  • D. Advanced Upgrade only

Answer: A


NEW QUESTION # 188
What are valid Policy Types in R81.X?

  • A. Access Control, Threat Prevention, QoS, Desktop Security
  • B. Access Control, IPS, Threat Emulation, NAT
  • C. Access Control, RemoteAccess VPN, NAT, IPS
  • D. Access Control, IPS, QoS, DLP

Answer: D


NEW QUESTION # 189
One of major features in R81 SmartConsole is concurrent administration.
Which of the following is NOT possible considering that AdminA, AdminB and AdminC are editing the same Security Policy?

  • A. A lock icon next to a rule informs that any Administrator is working on this particular rule.
  • B. A lock icon shows that a rule or an object is locked and will be available.
  • C. AdminA, AdminB and AdminC are editing three different rules at the same time.
  • D. AdminA and AdminB are editing the same rule at the same time.

Answer: D


NEW QUESTION # 190
What is a feature that enables VPN connections to successfully maintain a private and secure VPN session without employing Stateful Inspection?

  • A. Stateless Mode
  • B. Stateful Mode
  • C. VPN Routing Mode
  • D. Wire Mode

Answer: D


NEW QUESTION # 191
SmartEvent provides a convenient way to run common command line executables that can assist in investigating events. Right-clicking the IP address, source or destination, in an event provides a list of default and customized commands. They appear only on cells that refer to IP addresses because the IP address of the active cell is used as the destination of the command when run.
The default commands are:

  • A. ping, nslookup, Telnet, and route
  • B. ping, whois, nslookup, and Telnet
  • C. ping, traceroute, netstat, and nslookup
  • D. ping, traceroute, netstat, and route

Answer: B


NEW QUESTION # 192
......

156-315.81.20 Dumps Full Questions - Exam Study Guide: https://www.validdumps.top/156-315.81.20-exam-torrent.html

Use Real 156-315.81.20 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1J3fvZWJWbzDvimsvuvPcEoK0nI57qnEY