New ValidDumps H35-561 Exam Questions Real H35-561 Dumps Updated on Feb 14, 2022 [Q31-Q53]

Share

New ValidDumps H35-561 Exam Questions| Real H35-561 Dumps Updated on Feb 14, 2022

H35-561 Braindumps – H35-561 Questions to Get Better Grades

NEW QUESTION 31
Which one does the community load assessment do not include?

  • A. Hardware load
  • B. Air interface load
  • C. Transmission load
  • D. MME load

Answer: D

 

NEW QUESTION 32
Regarding the IP Multimedia Subsystem (IMS), which of the following descriptions is wrong?

  • A. Based on IP bearer network
  • B. can only support session-based services
  • C. Using the SIP (Session Initiation Protocol) protocol as the core control protocol
  • D. Provide IP multimedia service control capabilities independent of access

Answer: B

 

NEW QUESTION 33
Which layer of the LTE air interface performs the functions of encryption and integrity protection?

  • A. PDCP
  • B. MAC
  • C. PHY
  • D. RLC

Answer: A

 

NEW QUESTION 34
Which of the following measures can help solve the problem of ping-pong switching in the same-frequency LTE cell? (Multiple Choice)

  • A. Increase the filter factor
  • B. Decrease Hysteresis
  • C. Add Timetotrigger
  • D. Add eventA3Offset

Answer: A,C,D

 

NEW QUESTION 35
Regarding the re-election of the community, which of the following statements is wrong?

  • A. The larger the neighboring cell offset value CellQoffset, the harder it is to reselect the cell.
  • B. The priority of the inter-frequency neighboring area must be different from the serving cell
  • C. The serving cell and the inter-frequency system neighboring cell reselection priority are sent to the UE through the system message in the cell broadcast.
  • D. Same frequency neighbors have the same priority

Answer: B

 

NEW QUESTION 36
The LTE TDD system has the same synchronization accuracy requirements as the FDD system.

  • A. True
  • B. False

Answer: B

 

NEW QUESTION 37
Which of the following statements about LTE tools is ? (Multiple Choice)

  • A. OMStar can be used for network verification
  • B. M2000 can be used to configure the network and check the message system.
  • C. Probe can be used for road test and playback
  • D. PRS can be used for simulation and base station selection

Answer: A,B,C

 

NEW QUESTION 38
Management Logfile in the "Combine" function, more Logfile file can be merged into a Logfile file.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 39
Which of the following scenarios need to use the RIM process?

  • A. Redirection
  • B. CSFB
  • C. Flash CSFB
  • D. PS handover

Answer: C,D

 

NEW QUESTION 40
Which of the following are the steps of the Layer 1 random access process? (Multiple Choice)

  • A. Using the selected preamble sequence, using the transmit power for a preamble transmission on the indicated PRACH resource
  • B. Select the leading sequence in the set of preamble sequences using the leading sequence number
  • C. The upper layer requests the preamble to trigger the physical layer process.
  • D. The base station determines the power of each RE in the downlink

Answer: A,B,C

 

NEW QUESTION 41
D, F, E spectrum corresponding frequency band are respectively 38,39, 40; the corresponding frequency range respectively is 2570-2620,1880-1920,2300-2400.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 42
If the VoLTE call fails, what are the possible reasons? (Multiple Choice)

  • A. Proprietary bearer establishment failed
  • B. Codec negotiation failed
  • C. Domain selection failed
  • D. Billing failure

Answer: A,B,C,D

 

NEW QUESTION 43
E-UTRAN to GERAN different system switching has five switching strategies: PS HO, CCO/NACC, SRVCC, redirection and fast redirection.

  • A. Yes
  • B. False

Answer: A

 

NEW QUESTION 44
The "average number of downlink PRB resource usage" counts the number of RB used by the downlink PDCCH.

  • A. True
  • B. False

Answer: B

 

NEW QUESTION 45
Which process does the UE need to initiate if the network capability (security capability) of the UE changes?

  • A. Random-access
  • B. TAU
  • C. Detach
  • D. Paging

Answer: B

 

NEW QUESTION 46
Which control signaling can the uplink PUCCH send back? (Multiple Choice)

  • A. QoS
  • B. CQI
  • C. PMI
  • D. RI

Answer: B,C,D

 

NEW QUESTION 47
When single-station verification, if random access failure is found, what are the common reason?

  • A. UE side parameter configuration problem
  • B. eNodeB side parameter configuration problem
  • C. Channel environmental impact
  • D. Core network configuration problem

Answer: A,B,C

 

NEW QUESTION 48
Which of the following information cannot be carried by PUSCH?

  • A. CQI
  • B. HARQ feedback
  • C. RRC signaling
  • D. Transport format

Answer: D

 

NEW QUESTION 49
Antenna feed adjustment refers to the adjustment of antenna azimuth and downtilt angle. The most commonly used method is to eliminate cross-area coverage, weak coverage, and PCI mode 3 conflicting cells.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 50
Which of the following statements is true about the LTE protocol architecture? (Multiple choice)

  • A. The role of the logical channel is to characterize the type of message being transmitted.
  • B. The physical layer provides data transmission services to the upper layers, which can be accessed through the MAC sublayer and using the transport channel.
  • C. The role of the transport channel is to describe how information is transmitted over the wireless interface.
  • D. MAC provides different logical channels to Layer 2 Radio Link Control (RLC) sublayer

Answer: A,B,C,D

 

NEW QUESTION 51
Which of the following events can be used to trigger inter-frequency switching? (multiple choice)

  • A. A2
  • B. A4
  • C. A3
  • D. A5

Answer: B,C,D

 

NEW QUESTION 52
Which network elements will be used on the calling side for a basic IMS call? (Multiple choice)

  • A. I-CSCF
  • B. P-CSCF
  • C. HSS
  • D. S-CSCF

Answer: B,D

 

NEW QUESTION 53
......

H35-561 Exam Dumps - Try Best H35-561 Exam Questions: https://www.validdumps.top/H35-561-exam-torrent.html