Latest NS0-176 Study Guides 2022 - With Test Engine PDF [Q80-Q104]

Share

Latest NS0-176 Study Guides 2022 - With Test Engine PDF

Get New NS0-176 Practice Test Questions Answers

NEW QUESTION 80
Which three management tools would you use to configure the NetApp storage component in a FlexPod Datacenter solution? (Choose three.)

  • A. NetApp OnCommand System Manager
  • B. NetApp Virtual Storage Console (VSC) for VMware Sphere
  • C. Cisco UCS Director
  • D. Cisco UCS Central
  • E. NetApp OnCommand Perfromance Manager

Answer: A,B,D

 

NEW QUESTION 81
Which pool of addresses is created under Servers tab in UCS Manager as part of the Service Profile creation process?

  • A. WWNN Pools
  • B. UUID Suffix Pools
  • C. WWPN Pools
  • D. MAC Pools

Answer: B

 

NEW QUESTION 82
Which type of pools do you need to create vHBA templates?

  • A. MAC
  • B. WWPN
  • C. IQN
  • D. WWNN

Answer: B

 

NEW QUESTION 83
Exhibit:

You are configuring iSCSI boot from SAN on your UCS blades.
Referring to the exhibit, how many paths will there be to the Boot LUN?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 84
Your customer has the storage configuration for a FlexPod solution shown below.
- FAS8040 HA-pair
- Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
- Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
- There are no unused SAS ports on either controller
- There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).

  • A. Cable a new stack for the SSD shelf.
  • B. Cable the new shelf to the end of stack two.
  • C. Cable the new shelf to the end of stack one.
  • D. Cable the new shelf to the beginning of stack two.

Answer: A,D

 

NEW QUESTION 85
Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?

  • A. cluster-management
  • B. node-management
  • C. interconnect
  • D. intercluster

Answer: D

 

NEW QUESTION 86
Which is a valid connectivity option for a FlexPod?
Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements.

  • A. UCS B-Series > UCS FI > Catalyst 3750 < FAS
  • B. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
  • C. UCS C-Series direct attach FAS
  • D. UCS B-Series direct attach FAS
  • E. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS
  • F. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
  • G. UCS C-Series > Nexus 3048 < FAS

Answer: B,G

 

NEW QUESTION 87
Which three are types of Storage Virtual Machines? (Choose three.)

  • A. data
  • B. node
  • C. intercluster
  • D. flex
  • E. vFiler
  • F. cluster

Answer: A,B,F

 

NEW QUESTION 88
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)

  • A. HA pairs in the same chassis are not connected to each other through an HA interconnect.
  • B. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
  • C. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
  • D. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.

Answer: B,C

 

NEW QUESTION 89
Refer to the exhibit.

What management tool may be used for creating virtual machines?

  • A. System Center Orchestrator
  • B. MMC
  • C. System Center Virtual Machine Manager
  • D. Hyper-V Manager

Answer: D

 

NEW QUESTION 90
Which FlexPod management tool allows you to manage Storage Virtual Machines (SVMs) and replication relationships?

  • A. OnCommand Performance Manager
  • B. OnCommand Insight
  • C. OnCommand System Manager
  • D. OnCommand Balance

Answer: C

 

NEW QUESTION 91
Which three are characteristics of a NAS data LIF? (Choose three.)

  • A. It is associated with the administrative Vserver.
  • B. It can be associated with a Fibre Channel port.
  • C. It can be associated with a WWPN
  • D. It can be associated with an IP address.
  • E. It is associated with the management LIF.
  • F. It can be associated with an interface group (ifgrp).
  • G. It can be associated with an Ethernet port or VLAN interface.

Answer: D,F,G

 

NEW QUESTION 92
What management solution can provision all three components of a FlexPod (NetApp storage, Cisco UCS compute and Cisco Nexus network)?

  • A. Cisco FlexPod Manager
  • B. NetApp OnCommand Insight
  • C. NetApp FlexPod Manager
  • D. Cisco UCS Central
  • E. Cisco UCS Director

Answer: E

 

NEW QUESTION 93
Exhibit:

An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.
Referring to the exhibit, how many ports will FC use after the configuration is completed?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 94
Which service may be used to manage users and groups in a vSphere environment?

  • A. Domain Name System (DNS)
  • B. Network Time Protocol (NTP)
  • C. Microsoft Active Directory (AD)
  • D. VMware vSphere Storage APIs for Array Integration (VAAI)

Answer: C

 

NEW QUESTION 95
Which aggregates should be disabled for data aggregates?

  • A. FCP
  • B. Snapshot copies
  • C. iSCSI
  • D. SnapMirror copies

Answer: B

 

NEW QUESTION 96
Which two features allow multiple fabric logins through a single port? (Choose two.)

  • A. vPC
  • B. NPIV
  • C. LLDP
  • D. NPV

Answer: B,D

 

NEW QUESTION 97
Which two are the expected outputs of network interface show? (Choose two.)

  • A. WW port names of Fibre Channel and FCoE logical interfaces
  • B. IP addresses of NAS and iSCSI logical interfaces
  • C. Namespace of SAN logical interfaces
  • D. iSCSI IQNs
  • E. System WW node name

Answer: A,B

 

NEW QUESTION 98
What aggregate containing the root volume is created during the Clustered Data ONTAP setup process?

  • A. 32-bit
  • B. 64-bit
  • C. 16-bit
  • D. 8-bit

Answer: B

 

NEW QUESTION 99
Exhibit:

You have a NetApp cluster and have just performed a storage failover giveback command from the CLI.
Referring to the exhibit, what is the status of the storage failover process?

  • A. The giveback failed because the partner node was not in a "waiting for "giveback" state.
  • B. The giveback failed because cluster-01 was not able to communicate with the partner's cluster LIFs.
  • C. The giveback is partially completed waiting for node cluster-01 to give back the partner's SFO aggregate.
  • D. The giveback is partially completed waiting for node cluster-02 to give back the partner's SFO aggregate.

Answer: D

 

NEW QUESTION 100
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?

  • A. OnCommand Insight
  • B. UCS Manager
  • C. UCS Director
  • D. OnCommand System Manager

Answer: C

 

NEW QUESTION 101
When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?

  • A. IQN and IP address of target.
  • B. All zoning should be configured.
  • C. WWPN Pools.
  • D. Zonesets should be created.

Answer: A

 

NEW QUESTION 102
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches.
Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)

  • A. Using the Configure Unified Ports wizard, change the port types to Ethernet.
  • B. Using the Configure Unified Ports wizard, change the port types to FC.
  • C. Configure the FI ports with the Uplink role.
  • D. Configure the FI ports with the FCoE Uplink role.

Answer: B,C

 

NEW QUESTION 103
You are asked to install the Virtual Supervisor Module (VSM) software on a Nexus 1000v switch.
Which two sources would you use to install this software? (Choose two.)

  • A. PXE boot
  • B. VSC plug-in
  • C. OVA file
  • D. ISO image

Answer: A,D

 

NEW QUESTION 104
......

NS0-176 Dumps and Exam Test Engine: https://www.validdumps.top/NS0-176-exam-torrent.html

Network Appliance NS0-176 DUMPS WITH REAL EXAM QUESTIONS: https://drive.google.com/open?id=1RJDzqhkizN2AUb2IVgPbBx91UTxXD-Hm